Category Archives: Eliminate 99% of UV rays

Security Shatter Solar Safety Film, Comparisons to 3M Window Film

Here is a direct comparison between Advanced Film Solutions’ portfolio of security glazing films compared to an easily over matched 3M security film.

3M dealers will position brand awareness, and history of the 3M window film business. 

They may additionally present that they have completed a number of installations at schools (implying a higher level of experience.)

They have positioned their security film post Newtown massacre as an effective solution narrowing their focus to two security films a 6 ML thick Ultra 600 and a re-packaged film, the SH14. Most recently they introduced a standard 8 ML clear non ultra film that has less impact strength than SunTek, Hanita, LLumar, Armorcoat or Madico!

3M packages a silicone wet seal system they call IPD which offers no additional strength, adhesion or efficacy compared to Dow 995 which is the industry standard.

374639_315105961856215_1914254629_n


3M has a limited portfolio of security choices beyond the two selections they advocate for schools.

There are many instances where a solar version of a security film might offset utility costs by blocking heat gain and certainly there are numerous conditions which would be resolved with a privacy film that also provides the security benefit.

There are objective standards that rate the effectiveness of security films installed on various glass systems under a host of impact, blast and cycling tests.

Crime

 
Benefits of Security Glazing School Construction News:


The primary standards are: GSA. Department of Defense, ANSI, Factory Mutual, ASTM Testing, UL Testing.

It should be noted that Eastman Chemical Llumar & Vista, Madico, Saint-Gobain Armorcoat, Hanita, SunTek and Johnson meet or exceed the 3M film in each of these test categories.

  • Eastman Chemical: LLumar and Vista solar security films:
  • Saint-Gobain Armorcoat Film
  • Madico Safety Film
  • SunTek Security Film
  • Avery-Dennison Safety Zone Film

In terms of solar security combination films that lower heat gain and provides privacy:

Silver Reflective 20 – 8 ML
 
secure
 
  • Silver security films that block 79% of the heat (LLumar, Madico, SunTek, Armorcoat, Hanita)
  • Neutral security films in a 20, 35, 40, 50 VLT (LLumar, Madico, Hanita, Armorcoat)
    Neutral 20 – 8ML
  • Dual reflective security films in a 28, 38 VLT (Vista, SunTek)
  • Nano-ceramic Security films in a 40, 50, 70% VLT (Huper Optik, SunTek)
  • Clear available in 2, 4, 6, 8, 11, 14, 16 + thickness and a host of 4, 8, 7, exterior clear films. (LLumar, Armorcoat, Madico, Johnson, Hanita, SunTek)

Advanced Film Solutions trained installers have completed thousands of projects throughout the state of Florida and across the USA.

schol

Our team has earned the Super Service Award from Angie’s List for 9 years in a row.

We are fully insured and have earned an accredited A Plus Rating with the Better Business Bureau.

Call our offices toll free at 877-575-3456

Tampa Bay, Orlando RFQ Bid Window Tinting- Advanced Film

Window Tinting for homes and businesses is an essential aftermarket solution for heat, UV and glare control in Florida.

Thicker iterations of these films will improve the protection of your windows from forced entry and accidental breakage (golf balls, etc.)

Advanced Film Solutions with offices in Tampa Bay and Orlando is a full service professional installation company that services the entire Tampa Bay, Sarasota, Bradenton, Lakeland, Hernando, Citrus, Orlando (Orange and Seminole County area) collage (3)

We represent the world leader in window film technology, Eastman Chemical.

No other company offers as many choices in NFRC certified solar and solar security films:

  • LLumar solar and solar safety films.
  • Huper Optik

Our pricing is set to win and we are fully insured with workers comp.

Our track record for meeting and exceeding our clients requirements has earned Advanced Film Solutions an A+ rating with the BBB.

We earned Angie’s List Super Service Award for 2011, 2012 2013 2014 2015, 2016. 2017. 2018.

We have completed more than 15000 home and business installations since 2007.

Landmark installations throughout Florida.

To request a free estimate or proposal contact Advanced Film Solutions, toll free: 877-575-3456

 Lower your monthly electric bill by up to 30% a month!

ADVANCED FILM SOLUTIONS

TOLL FREE: 877-575-3456

huperoptik

Orlando Window Tinting Advanced Film Solutions

Orlando gets hot.
 

coll

Then it stays hot.

Humid.

Hotter.

That’s why homeowners in the Greater Orlando area rely on the sun control experts of Advanced Film Solutions.

Our team of expert installers has earned the Super Service Award from Angie’s List for 9 straight years. 

2942595

Our clients enjoy lower interior temperatures, reduced glare and UV virtually eliminated by 99.9%

 

 

Advanced Film Solutions has more choices like our Vista Film, LLumar,  Huper Optik, Hanita, Sunscape, Madico, Solar Gard and SunTek.

Choices drive value for our clients and match every budget and project scope.
 
 

Call for a free estimate and look for our coupons in your local neighborhood magazines.

Cooler, safer, economically priced coatings specifically engineered for the hottest Orlando homes!

HO_5472 copy-XL

 
 
877-575-3456
 

 

Solving Tampa’s Overheated Acrylic, Polycarbonate Sunroom Windows

Many Florida homeowners have a sun room extension added to their living space. One popular material used in this design are acrylic windows (aka Lexan, Plexiglass, Polycarbonate)

These plastic windows are generally employed because of their durability against high impact from storms, flying debris or simply an errant gold ball. Typically these windows are installed in the clear version which compounds the heat gain issue.

 

Sunrooms are terrific in the cooler winter season but become hot houses in the long tropical Florida summer.

 

Fortunately Advanced Film Solutions has several effective solutions that factor out the heat and let you enjoy your investment throughout the entire year.

Avery PolyZone is our line of window films for the polycarbonate (often Lexan brand) and acrylic (often Plexiglas) sheet markets.

Our Madico Blister Free: A clear film created specifically for polycarbonate
(Lexan®) and acrylic (Plexiglass®) substrates that allows solar control or decorative films to then be applied

It is often used to achieve solar control on skylights and on acrylic windows in schools, hospitals and treatment facilities, coatings are designed specifically for acrylic windows.

Standard polyester window films are not recommended for this application because of the potential for bubbling. Thanks to the unique adhesives used in our products this concern is eliminated.

Call Advanced Film Solutions today toll free at 877-575-3456
 

 

Patented Huper Optik Ceramic Films Vs. Generic Ceramic

There may be no better example of the “murkiness” of the window film industry than the  ceramic window film landscape.

ho

Let me clarify this for consumers doing their research.

The technology that we describe as ceramic was developed by Southwall Technology.

This innovative company has recently been acquired by Eastman Performance Films, the world leader in window film sales and technology.

Southwall developed this film to provide unique durability with extremely effective total solar heat rejection. The benefits for the consumer in selecting this technology is the film’s ability to factor out significant levels of heat without a metallic reflective appearance.

This is ideal for deed restricted communities that prohibit the use of shiny window film or historic buildings and retail stores where aesthetic appearance and curb appeal are vital considerations.

The unique, patented ceramic solution is marketed under the brand name Huper Optik

For clarification purposes the patent covers the multi-layered composition of the film.

All competitive generic ceramic films are single layered and fall short of Huper Optik in several critical factors:

  • Huper Optik has less interior and exterior reflectivity than the generic films.
  • Huper Optik is available in more light transmissions than the generic films.
  • Huper Optik factors out more total solar energy than the generic films.
  • Huper Optik is available in wider widths than the generic single-layered films.
  • Huper Optik is available in more light transmissions including a 20,30,40,50,60 and 70% light transmission. More choices equates to customized solutions.

These generic ceramic films are available from various companies.

Many represent themselves as manufacturers (they may manufacture their own films using different technology but not this ceramic single layer film) or private label distributors marketing this film under their own brand name.

The salient fact is that they all re-box a single layered ceramic film made by one company that uses the older equipment that had been previously contracted by Huper Optik

When Huper Optik elected to upgrade their own processes and move to Germany they produced wider width films.  The single layered producer could not infringe on the Huper Optik patent.

19191721680_f788f92016_z

From a material value perspective ceramic films sold by Johnson Window Film, Geoshield, 3M Ceramic Film and Madico MAC Series (there are others sold under lesser known private labels) that are the exact same single layered film.

Now you wouldn’t know that if you peruse the marketing literature produced by these re-boxers.

Our 3M competition goes a giant one step further than the rest in promoting “their” ceramic film product which a consumer might find interesting.

They misdirect (in my opinion) consumers by highlighting that they make their own polyester and adhesives.

That’s wonderful.

Unfortunately since they did not make this ceramic film that ability is irrelevant when marketing this particular single layered ceramic film.

Take a gander at these statements:

“the only ceramic film worthy of the 3M name”

Yet they don’t make a stitch of this film!

“Using nanotechnology we’ve created ceramics so fine they are not only invisible to the naked eye they are imperceptible with an ordinary microscope. These ceramics allow us to create a film that is tough, won’t corrode and is so clear your view will remain beautiful”

This may be true in principle but that statement is not applicable to this film, since they did not make it!

“3M not only invented window film, it single-handedly developed many of the major window film innovations over the past four decades.”

Its debatable that 3M  invented window film (they did not!) but the implication is clearly suggesting that 3M “innovated” this film. Since they did not, their misleading statement is unfortunate.

Let’s suppose an ordinary consumer (YOU?) were shopping for a ceramic window film.  They did their research and received several quotations.

Would any of these points clarified above make a material difference in weighing a decision?

You decide!

Advanced Film Solutions proudly installs patented Huper Optik Ceramic Films manufactured by Eastman Performance Films. NFRC certified!

Fact Over Illusion

bg

Toll Free 877-575-3456

getcooler