Category Archives: Sarasota Bradenton Window Tinting

Security Shatter Solar Safety Film, Comparisons to 3M Window Film

Here is a direct comparison between Advanced Film Solutions’ portfolio of security glazing films compared to an easily over matched 3M security film.

3M dealers will position brand awareness, and history of the 3M window film business. 

They may additionally present that they have completed a number of installations at schools (implying a higher level of experience.)

They have positioned their security film post Newtown massacre as an effective solution narrowing their focus to two security films a 6 ML thick Ultra 600 and a re-packaged film, the SH14. Most recently they introduced a standard 8 ML clear non ultra film that has less impact strength than SunTek, Hanita, LLumar, Armorcoat or Madico!

3M packages a silicone wet seal system they call IPD which offers no additional strength, adhesion or efficacy compared to Dow 995 which is the industry standard.

374639_315105961856215_1914254629_n


3M has a limited portfolio of security choices beyond the two selections they advocate for schools.

There are many instances where a solar version of a security film might offset utility costs by blocking heat gain and certainly there are numerous conditions which would be resolved with a privacy film that also provides the security benefit.

There are objective standards that rate the effectiveness of security films installed on various glass systems under a host of impact, blast and cycling tests.

Crime

 
Benefits of Security Glazing School Construction News:


The primary standards are: GSA. Department of Defense, ANSI, Factory Mutual, ASTM Testing, UL Testing.

It should be noted that Eastman Chemical Llumar & Vista, Madico, Saint-Gobain Armorcoat, Hanita, SunTek and Johnson meet or exceed the 3M film in each of these test categories.

  • Eastman Chemical: LLumar and Vista solar security films:
  • Saint-Gobain Armorcoat Film
  • Madico Safety Film
  • SunTek Security Film
  • Avery-Dennison Safety Zone Film

In terms of solar security combination films that lower heat gain and provides privacy:

Silver Reflective 20 – 8 ML
 
secure
 
  • Silver security films that block 79% of the heat (LLumar, Madico, SunTek, Armorcoat, Hanita)
  • Neutral security films in a 20, 35, 40, 50 VLT (LLumar, Madico, Hanita, Armorcoat)
    Neutral 20 – 8ML
  • Dual reflective security films in a 28, 38 VLT (Vista, SunTek)
  • Nano-ceramic Security films in a 40, 50, 70% VLT (Huper Optik, SunTek)
  • Clear available in 2, 4, 6, 8, 11, 14, 16 + thickness and a host of 4, 8, 7, exterior clear films. (LLumar, Armorcoat, Madico, Johnson, Hanita, SunTek)

Advanced Film Solutions trained installers have completed thousands of projects throughout the state of Florida and across the USA.

schol

Our team has earned the Super Service Award from Angie’s List for 9 years in a row.

We are fully insured and have earned an accredited A Plus Rating with the Better Business Bureau.

Call our offices toll free at 877-575-3456

Clear Winner-Ceramic Window Tinting Film Versus Multi-Layered Optical Film

Our business plan at Advanced Film Solutions wasn’t created accidentally.

We developed a strategy that would allow us to compete and win in every residential or commercial consumer competition.

Deed Restricted or gated communities, golf communities, condo’s and town houses. Gulf, bay or lake view properties. High end retail stores (jewelry, curious, furniture, rugs, clothing retail stores and financial institutions.

Homeowners are comparing our Huper Optik Ceramic Films versus the 3M Prestige Film that they have seen at home depot kiosks throughout the region.

 

Advanced Film Solutions is unique in having a thorough and extensive familiarity with both solutions. After all we were with 3M for 33 years and was once the National Sales Manager of 3M window film.

Here is our “Reader’s Digest” comparison:

  • Huper Ceramic Films are available in a 20%, 30% and 35% Visible Light Transmission that all out perform the 3M  Prestige 40 in heat rejection (we qualified for the TECO energy rebates, they did not!)
    Huper Optik has a natural hue as opposed to the 3M blue-ish appearance.
  • Huper Optik films do not present iridescence “rainbow effect” on the transmitted light. The prestige films do produce this multi-colored effect on light color walls or tile.
  • Huper Optik Ceramic Films have a durable color fast scratch coat.  The prestige color is a virtue of a dyed layer on the top surface of their film.  These colors can be scratched from the surface on all of their “tinted” versions.
  • Optical clarity.  Our films have no distortion or haze effect. We will match any Prestige film side by side for visual clarity!1377550_649384238428384_1092466071_n
  • Take the Huper Challenge and compare them side-by-side. You will observe why Huper Optik is the clear winner!

  • Huper Ceramic Films won’t  interfere with cell phones, wireless, or fiber optic EM transmissions.
  • Huper Optik is less reflective than glass so your day and night views are preserved.
  • Huper Optik ceramics do not corrode in humid environments. Prestige will not corrode. Any implication from their side that our ceramic films corrode is pure fabrication.

  • All ceramic films, and metal films for that matter work better when the sun is at an acute or obtuse angle. Prestige is similar in that respect, as is clear glass. Implications that their film meets some type of extraordinary testing standard is 100% disingenuous.
  • Huper Optik Ceramic Films are NFRC Certified for performance characteristics.

Miscellaneous:

  • They “invented” window film and make thousands of products.
    -Response: They are a terrific company and they did not invent window film, they patented a metal application to polyester films. That was 40 years ago and lots of things have changed.

  • They can use Windex, we can’t?
    -Response: utterly ridiculous particularly with prestige film. Take a Scotch Brite abrasive sponge to their film and watch the color come right off. Do the same with Vista or Huper! Go on. .you’ll see who has a hard coat!
  • Better Warranty?
    -Response: Our films have a lifetime warranty as do theirs! Our is transferable to the next homeowner; theirs ends when you sell your home!

  • “We are 100 plus years old; and ‘they’ may not be around in the future!”
    -Response: Eastman is a multi-billion dollar company borne from Eastman Kodak.

Compare for yourself and get the clearest comparison in Florida Huper Optik Films against 3M Prestige films.

Advanced Film Solutions, 877-575-3456.

Solving Tampa’s Overheated Acrylic, Polycarbonate Sunroom Windows

Many Florida homeowners have a sun room extension added to their living space. One popular material used in this design are acrylic windows (aka Lexan, Plexiglass, Polycarbonate)

These plastic windows are generally employed because of their durability against high impact from storms, flying debris or simply an errant gold ball. Typically these windows are installed in the clear version which compounds the heat gain issue.

 

Sunrooms are terrific in the cooler winter season but become hot houses in the long tropical Florida summer.

 

Fortunately Advanced Film Solutions has several effective solutions that factor out the heat and let you enjoy your investment throughout the entire year.

Avery PolyZone is our line of window films for the polycarbonate (often Lexan brand) and acrylic (often Plexiglas) sheet markets.

Our Madico Blister Free: A clear film created specifically for polycarbonate
(Lexan®) and acrylic (Plexiglass®) substrates that allows solar control or decorative films to then be applied

It is often used to achieve solar control on skylights and on acrylic windows in schools, hospitals and treatment facilities, coatings are designed specifically for acrylic windows.

Standard polyester window films are not recommended for this application because of the potential for bubbling. Thanks to the unique adhesives used in our products this concern is eliminated.

Call Advanced Film Solutions today toll free at 877-575-3456
 

 

Patented Huper Optik Ceramic Films Vs. Generic Ceramic

There may be no better example of the “murkiness” of the window film industry than the  ceramic window film landscape.

ho

Let me clarify this for consumers doing their research.

The technology that we describe as ceramic was developed by Southwall Technology.

This innovative company has recently been acquired by Eastman Performance Films, the world leader in window film sales and technology.

Southwall developed this film to provide unique durability with extremely effective total solar heat rejection. The benefits for the consumer in selecting this technology is the film’s ability to factor out significant levels of heat without a metallic reflective appearance.

This is ideal for deed restricted communities that prohibit the use of shiny window film or historic buildings and retail stores where aesthetic appearance and curb appeal are vital considerations.

The unique, patented ceramic solution is marketed under the brand name Huper Optik

For clarification purposes the patent covers the multi-layered composition of the film.

All competitive generic ceramic films are single layered and fall short of Huper Optik in several critical factors:

  • Huper Optik has less interior and exterior reflectivity than the generic films.
  • Huper Optik is available in more light transmissions than the generic films.
  • Huper Optik factors out more total solar energy than the generic films.
  • Huper Optik is available in wider widths than the generic single-layered films.
  • Huper Optik is available in more light transmissions including a 20,30,40,50,60 and 70% light transmission. More choices equates to customized solutions.

These generic ceramic films are available from various companies.

Many represent themselves as manufacturers (they may manufacture their own films using different technology but not this ceramic single layer film) or private label distributors marketing this film under their own brand name.

The salient fact is that they all re-box a single layered ceramic film made by one company that uses the older equipment that had been previously contracted by Huper Optik

When Huper Optik elected to upgrade their own processes and move to Germany they produced wider width films.  The single layered producer could not infringe on the Huper Optik patent.

19191721680_f788f92016_z

From a material value perspective ceramic films sold by Johnson Window Film, Geoshield, 3M Ceramic Film and Madico MAC Series (there are others sold under lesser known private labels) that are the exact same single layered film.

Now you wouldn’t know that if you peruse the marketing literature produced by these re-boxers.

Our 3M competition goes a giant one step further than the rest in promoting “their” ceramic film product which a consumer might find interesting.

They misdirect (in my opinion) consumers by highlighting that they make their own polyester and adhesives.

That’s wonderful.

Unfortunately since they did not make this ceramic film that ability is irrelevant when marketing this particular single layered ceramic film.

Take a gander at these statements:

“the only ceramic film worthy of the 3M name”

Yet they don’t make a stitch of this film!

“Using nanotechnology we’ve created ceramics so fine they are not only invisible to the naked eye they are imperceptible with an ordinary microscope. These ceramics allow us to create a film that is tough, won’t corrode and is so clear your view will remain beautiful”

This may be true in principle but that statement is not applicable to this film, since they did not make it!

“3M not only invented window film, it single-handedly developed many of the major window film innovations over the past four decades.”

Its debatable that 3M  invented window film (they did not!) but the implication is clearly suggesting that 3M “innovated” this film. Since they did not, their misleading statement is unfortunate.

Let’s suppose an ordinary consumer (YOU?) were shopping for a ceramic window film.  They did their research and received several quotations.

Would any of these points clarified above make a material difference in weighing a decision?

You decide!

Advanced Film Solutions proudly installs patented Huper Optik Ceramic Films manufactured by Eastman Performance Films. NFRC certified!

Fact Over Illusion

bg

Toll Free 877-575-3456

getcooler

Window Film Comfort, Tampa, Orlando Coolest Homes

Clear glass windows facing east, south or west offers more than a wonderful view here in Tampa or Orlando.

 

That clear single pane or tempered glass window invites

 
GLARE
 

 

HEAT

UV

because

High Electric Bills

Discomfort

Zero Privacy!

Advanced Film Solutions solves that glare problem with solar control coatings that eliminate UV, glare and heat.

Optically transparent coatings that can provide privacy and add strength to your windows against impact and forced entry.

390686_326676087365869_1725031235_n

We have a solution that will  exactly match your aesthetic requirements involving reflectivity (or lack of!) light transmission, and hue (if any!)

We provide free estimates and more choices than any other window film company in Florida.

Advanced Film Solutions represents these NFRC rated films:
 
  • Vista Films
  • LLumar

  • Huper Optik
  • Solar Gard
  • Armorcoat Films (listed under Bekaert, but currently a St. Gobain company
  • Hanita (Avery-Dennison)
  • SunTek
  • Madico
BBB Rated A-Plus and we have earned Angie’s List Super Service Winners for 10 straight years!
 
 
 
 
 
 

Toll Free: 877-575-3456

Tampa Hillsborough: 813-949-3456

Pinellas: 727-944-3456

Orlando: 407-843-9350